Hello community,
it is possible the device name display in Wavelink?
As our warehousemen are always asked about the device name and they are not allowed from the application, it is difficult to determine the.
Is there a solution for this?
↧
Display Device Name of MC55 in Wavelink?
↧
disable bluetooth scanning
We are using the Zebra WT41N0 wearable terminals with Voice and RS507 Bluetooth scanners.
These devices use TelnetCE to connect to an AS400 application using VT220 emulation
We have a problem when users decide to scan a barcode in a numeric STT field. The terminal
completely locks up and a reboot is needed. Afterwards, the Bluetooth scanner will no longer pair
properly. The pairing barcode displays 0x717CFFFFFFFF.
In order to get the Bluetooth working again I have to re-install the patch for making Bluetooth work
within Telnet. SPR27665_WT41N0_EN_035402_v1_0_WB.cab. Sometimes even this does not
help.
↧
↧
How to Use DataWedge on Intermec CK71
I pushed a package to install DataWedge on a CK71 device but am not able to run DataWedge (it remains in Idle mode). What am I missing? The scanner port is enabled and I have tried turning scanwedge on/off.
↧
Avalanche 6.2 installation - DB Connection failed
Dear all,
I would like to know if anyone has made a new install of Avalanche 6.2?
I've attempted this on my PC (Windows 8.1 SQL Server 2012 existing SQL instance) and also Win server 2012 and SQL server - a new machine with nothing installed on it - just Windows server - on which I installed SQL server 2012 and created new instance.
On both machines, the installation is done, during it, Ava install asks for DB connection credential and server which are on the same machine, creates Avalanche Databases.
When installation finished, it's not possible to launch http console; Enterprise server service is stopped, and eache time we try to start is, it fall dows after few seconds with the following error in the logs (colored red):
2017-12-13 16:46:43,366 INFO LoggingProperties - Avalanche Server version 6.2.0 - (c) 2013-2017 Ivanti
2017-12-13 16:46:43,368 INFO LoggingProperties - log4jAvalancheServer.properties: located in C:\Program Files\Wavelink\Avalanche\conf\main\log4jAvalancheServer.properties
2017-12-13 16:46:43,369 INFO LoggingProperties - Logging level set to: DEBUG
2017-12-13 16:46:43,372 INFO ServerConfigProperties - ServerConfigProperties initializing
2017-12-13 16:46:43,432 INFO ServerConfigProperties - server-config.xml: located in file:/C:/Program%20Files/Wavelink/Avalanche/conf/main/server-config.xml
2017-12-13 16:46:43,440 INFO SpringContextInitializer - SpringContextInitializer initializing
2017-12-13 16:46:45,733 INFO SpringContextInitializer - api-factory.xml: located in C:\Program Files\Wavelink\Avalanche/conf/main/api-factory.xml; initialized Wed Dec 13 16:46:43 CET 2017
2017-12-13 16:46:45,734 INFO InstallationUUID - InstallationUUID initializing
2017-12-13 16:46:45,734 INFO InstallationUUID - installationUUID: [de4fd05c-809e-4069-9005-443215c951b7]
2017-12-13 16:46:45,735 DEBUG AvalancheServer - Installation UUID initialized
2017-12-13 16:46:45,735 INFO AvalancheServer - Starting Avalanche Server...
2017-12-13 16:46:45,735 INFO AvalancheServer - Local drives are:
2017-12-13 16:46:45,735 INFO AvalancheServer - C:\ D:\ E:\ F:\
2017-12-13 16:46:45,737 INFO DatabaseProperties - DatabaseProperties initializing
2017-12-13 16:46:45,737 INFO DatabaseProperties - Hibernate Dialect set to: com.wavelink.avalanche.db.dialect.WavelinkeSQLServerDialect
2017-12-13 16:46:45,737 INFO DatabaseProperties - Database in use: Avalanche
2017-12-13 16:46:45,738 INFO DatabaseProperties - Data Source URL set to: jdbc:sqlserver://NEWSRV2017:1433;databaseName=Avalanche
2017-12-13 16:46:45,787 ERROR DatabaseProperties - HibernateSequenceCheck: No DB connection
2017-12-13 16:46:45,787 ERROR DatabaseProperties - setDatabaseProperties() failed.
2017-12-13 16:46:45,787 FATAL AvalancheServer - Unable to initialize DatabaseProperties.
2017-12-13 16:46:45,787 FATAL AvalancheServer - Initialization failed when attempting to set property: setDatabaseProperties()
2017-12-13 16:46:45,787 FATAL AvalancheServer - <<<< Avalanche Server will terminate... >>>>
2017-12-13 16:46:45,788 INFO AvalancheServer - <<<< Avalanche Server has terminated >>>>
Could somebody tell me what happens here and why is the wizard able to create database and establish db connection and not the enterprise server service?
Thx in advance for your help
Elie
↧
Autostart Velocity
How do I configure Velocity to start automatically when the device starts up and autostart web session?
It's on Zebra TC8000.
↧
↧
Text Goes Off Screen - Wavelink, Produce Pro
Hey everyone,
I've been having this issue with my MC9190s and MC92N0s for awhile now and I still haven't figured it out.
Basically we run using Produce Pro and the text seems to be running off the screen. I'm not allowed to take the simple route of just enabling the horizontal scroll.
Here's what going on:
As you can see, the text cuts off at 2. There is more after this. Look below: (All I did to get it all to display for this picture is take the text down to 11 rather than having it at 13, however its far to small.)
It doesn't just change the login screen, it happens all through the software. It's super hard for them to do their job when this is happening. Any ideas?
↧
Wavelink Licenseserver spamming other servers on port 1820 and 2001
Hello,
in the security eventlog. It is Windows Filterring Platform that blocks a packet from 2 servers on which Wavelink Licenserver is installed. The event happens every 2. Minut.
IP: 10.XXX.XXX.165/166 (IPs of Wavelink servers) port 2001 and port 1820. If I look at these 2 ports, they are used by “LicenseServer.exe”. It Is startet by the “Wavelink Client License Server” service.
I can read from the configuration file that Port 1820 is used for contact to other licenseserver. (I have created a DNS entry for both servers)
So it could be possible that Wavelink is pulling other servers than the one specified in the configuration file for a license?
Example on one server. In 2 days there are 96.877 security event. 38.082 of them are event ID 5152, and almost all of the are Autir Failure events from the Wavelink Client License Server service, installed the 2 servers above.
Here is the configuration file, maybe something should be set up different?
######################################
# License Server Configuration File
######################################
LicenseAddress = 0.0.0.0:1820
HttpAddress = 0.0.0.0:4420
Username = "XXX"
Password = "YYY"
# "OtherServer" lines allow you to specify the addresses of other additional license servers.
# These servers can then be kept synchronized if they have the same username and password specified.
# You can use multiple OtherServer lines if you have multiple license servers besides this one.
# Use the format "OtherServer = address:port" for each line.
# If the port value is not specified, port 1820 is assumed.
#
# The License Server will always try to detect other servers on the same network section.
# This option is only needed to detect servers on other sections of the network.
#OtherServer = corporateserver7:1820
OtherServer = wavelink02
ServerSiteId = 0
ShowAllLicenses = TRUE
SiteIdForUnassignedDevices = 0
ReassignDays = 14
LogLevel = INFO
LogSize = 1000000
LogBackups = 3
---------------------------------------------
Here are some entries from the Wavelink log on one of the servers. Dosnt look right to me. Can you tell me what this error means?
+142378125 2: No "TelnetCE Maintenance" licenses available for MAC Address 002368D60AFE, Site ID 0 +142383375 2: No "TelnetCE 7.0 VT" licenses available for MAC Address 002368D57C93, Site ID 0 +142383375 2: No "TelnetCE 7.0 VT/IBMHOST" licenses available for MAC Address 002368D57C93, Site ID 0 +142383375 2: No "TelnetCE 7.0 VT/IBMHOST/WEB" licenses available for MAC Address 002368D57C93, Site ID 0 +142383375 2: No "TelnetCE Maintenance" licenses available for MAC Address 002368D57C93, Site ID 0 +142383407 2: No "TelnetCE 7.0 VT" licenses available for MAC Address 002368D60AFE, Site ID 0 +142383407 2: No "TelnetCE 7.0 VT/IBMHOST" licenses available for MAC Address 002368D60AFE, Site ID 0 +142383407 2: No "TelnetCE 7.0 VT/IBMHOST/WEB" licenses available for MAC Address 002368D60AFE, Site ID 0 +142383407 2: No "TelnetCE Maintenance" licenses available for MAC Address 002368D60AFE, Site ID 0 +142388625 2: No "TelnetCE 7.0 VT" licenses available for MAC Address 002368D57C93, Site ID 0 +142388625 2: No "TelnetCE 7.0 VT/IBMHOST" licenses available for MAC Address 002368D57C93, Site ID 0 +142388625 2: No "TelnetCE 7.0 VT/IBMHOST/WEB" licenses available for MAC Address 002368D57C93, Site ID 0 +142388641 2: No "TelnetCE Maintenance" licenses available for MAC Address 002368D57C93, Site ID 0 +142388672 2: No "TelnetCE 7.0 VT" licenses available for MAC Address 002368D60AFE, Site ID 0 +142388672 2: No "TelnetCE 7.0 VT/IBMHOST" licenses available for MAC Address 002368D60AFE, Site ID 0
Any help appriciated. Thank you
↧
How to send data from a thrid android app to Velocity
My goal is to send data to Velocity client. For this reason I am using an intent on my custom Application. the code is the following:
public void SendToVelocity(View view)
{ Intent sendIntent = new Intent(); sendIntent.setAction("com.wavelink.intent.action.EMDK.SEND"); sendIntent.addCategory("android.intent.category.DEFAULT"); sendIntent.putExtra(Intent.EXTRA_TEXT, "RFID data"); sendIntent.setType("text/plain"); if (sendIntent.resolveActivity(getPackageManager()) != null) { startActivity(sendIntent); }
}
However the above code does not get inside if statement. This means that it can not resolve current intent action.
My questions are:
- Is the above (com.wavelink.intent.action.EMDK.SEND) action string valid for calling corresponding Velocity Action? If not what is the corrcet string?
- The above method would like to be called on a key press. What script to I need to write in Velocity console in order to call a method of another application?
↧
Wavelink in MC9090 and MC9060?
Hi,
I bought two MC9000, one MC9090 and one MC9060. And I need check or installa on PDAs:
Wavelink Emulator Telnet installed. With WEB adapter. with Windows CE 5.0 running WaveLink Telnet CE Version 7.0.x
So, please can you help me?
Thanks
Luis
↧
↧
How to send data from a thrid android app to Velocity
My goal is to send data to Velocity client. For this reason I am using an intent on my custom Application. the code is the following:
public void SendToVelocity(View view)
{ Intent sendIntent = new Intent(); sendIntent.setAction("com.wavelink.intent.action.EMDK.SEND"); sendIntent.addCategory("android.intent.category.DEFAULT"); sendIntent.putExtra(Intent.EXTRA_TEXT, "RFID data"); sendIntent.setType("text/plain"); if (sendIntent.resolveActivity(getPackageManager()) != null) { startActivity(sendIntent); }
}
However the above code does not get inside if statement. This means that it can not resolve current intent action.
My questions are:
- Is the above (com.wavelink.intent.action.EMDK.SEND) action string valid for calling corresponding Velocity Action? If not what is the corrcet string?
- The above method would like to be called on a key press. What script to I need to write in Velocity console in order to call a method of another application?
↧
How can I set the GS1 application identifier to return a ^ for my SAP BSP application to read
Currenty using MC9200 with wavelink and need to have the AI returned as a ^ so the application an read and determine the serial number out of the barcode scan. Currently the barcode read is just returning the AIs as numbers.
↧
Is it possible to send the Wavelink configuration using Soti Mobi control?
On Zebra XT15 with Windows mobile 6.5, can i send the wavelink configuration using Soti Mobi control?
↧
Where can I download Naurtech CETerm 5.7
The CETerm link on the downloads page does not work.
Where can I download Naurtech CETerm 5.7?
FYI here is the link that is inactive.
↧
↧
RS507 bluetooth scanner locking up
I am using a Zebra WT41N0 and a RS507 bluetooth scanner, I am also using a TE applications and an AS400 has the host. The issue that I am having is that the user will be working and moving along just fine, they scan a barcode and then nothing happens, the scanner will not product a beam. When I remove and reinsert the battery I get the start up LED's and then it goes back to doing nothing. The only way to fix it is to have the user log out and then reboot the terminal and pair it again. Also the user will be working and the pairing barcode will pop up for unknown reason and asked to be paired again. I tested it with a fully charged battery and it happened to be. I put the scanner in pick list mode and enabled the low battery warnings but I did not get any warnings about battery getting low. Are there any ideas of what could be happening? Thanks
↧
In Telnet CE FN F9 and F7 no funktion
Hello all,
we have change from Motorola to Zebra Warkabout pro 4.
We use telnet ce 7.3 and we need the F7 and F9 Button.
If i press the Button, no function with CTRL with blue FN no reaction.
so i have do from a other forum,edit the emulationparameters.i must press the 7 button 1sek to press F7.
it‘s work but it is not the best solution.
i want use the F7 With the blue FN Button,what can i do?
thansk for help Andre
↧
F5 function key is not working in SAP ITS screens
Hi experts,
We are using SAP ITS RF and wavelink browser on intermec CK3x devices. We are having an issue with F5 function key. When F5 is hit, the screen just refreshes and it does not do the intended action. It looks like the key code "F5" is not being recognized by ITS template.
In the ITS template, we have maintained the following meta tag for "F5".
<META HTTP-Equiv="OnKeydispatch0x74" content="Javascript:setFKey('5');">
The keyboard test gives the following key codes for "F5".
F5 = 3F00 under the keyboard test
F5 = 0074 under the windows keyboard test
Am I missing something.?
Thanks in advance.
↧
How to get details of SSID in Wavelink Console
Hi All,
I was just looking for a way to display the SSID (Reported and Assigned SSID) in the console. There are properties like AgentAddress, AppliedProfile, AssignedIP, etc., so is there a similar Property for SSID or is there a way we could get it displayed on the AMC Console under Columns or in Filters?
↧
↧
TelNetCE CE 7.3: Next input field
Hi,
We are using SAP ITS with Wavelink Industrial browser 7.3. We have programmed to go to next input field when "Enter" key is pressed. The functionality is working in the internet explorer but on the WaveLink industrial browser. The function keys are also not working with the industrial browser.
Please let me know if I'm missing any step in this.
Thanks
Lin
↧
Text Goes Off Screen - Wavelink, Produce Pro
Hey everyone,
I've been having this issue with my MC9190s and MC92N0s for awhile now and I still haven't figured it out.
Basically we run using Produce Pro and the text seems to be running off the screen. I'm not allowed to take the simple route of just enabling the horizontal scroll.
Here's what going on:
As you can see, the text cuts off at 2. There is more after this. Look below: (All I did to get it all to display for this picture is take the text down to 11 rather than having it at 13, however its far to small.)
It doesn't just change the login screen, it happens all through the software. It's super hard for them to do their job when this is happening. Any ideas?
↧
Advance page in Zebra MC32 in Wavelink Terminal Emulation
Hello.
I need to configure some Zebra MC32 devices (Windows CE7) with a page advance key in Wavelink TE.
Can you tell me how I can configure it?
Thanks in advance.
Carlos
↧