It's possibile to use the "sceen panning" function with a phisical key on an FALCON X3 in VT200 emulation ?
The customer need sometimes to see the right part of the screen pressing a key.
Tnx
↧
VT220 SCREEN PANNING WITH PHISICAL KEY
↧
Html 5 Page
I'm using a Datalogic Skorpio X3 and I have a web page in html5 and with Velocity I only see an icon and with other browsers the information appears.If I refresh the page the Velocity stop responding.
Rui
↧
↧
Is it possible to send the Wavelink configuration using Soti Mobi control?
On Zebra XT15 with Windows mobile 6.5, can i send the wavelink configuration using Soti Mobi control?
↧
Is the MOT_MC92N0_CE7 Wavelink Product Configuration still supported?
We have MOT_MC92N0_CE7 Wavelink Product Configuration installed on a PC. It is not communicating via USB. Is there a Windows 10 version? Is the product even still supported?
↧
SSH timeouts
I have a customer using WT41N0 with TE and TC70 using velocity with Manhattan WMOS.
Which are using SSH authentication and are timing out after 5 minutes of inactivity and taking users back to log in screen.
I have looked into all device type settings changing power modes and CAM modes on the devices.
Has anybody seen this behaviour before or is there a way to keep an ssh session alive using the TE or Velocity?
↧
↧
barcode scanner on telnetCE, device intermec CN51
Hello
ii worked before on cn70 and telnetce, but now i received new intermec cn51.
Installed:
WLTE_UNI_WM65_LANG_7_3_225_AS.exe
on telnetCE, barcode scanner dont write data, outside TelnetCE screen, works fine
changed this parameters but no luck
Emulation Parameters:
1. Scanner then Common and "Disable Scanner" to YES
2. Scanner then Common and "Use Scanner As Keyboard Wedge" to ENABLE
could you help me?
thanks in advance
↧
Text Goes Off Screen - Wavelink, Produce Pro
Hey everyone,
I've been having this issue with my MC9190s and MC92N0s for awhile now and I still haven't figured it out.
Basically we run using Produce Pro and the text seems to be running off the screen. I'm not allowed to take the simple route of just enabling the horizontal scroll.
Here's what going on:
As you can see, the text cuts off at 2. There is more after this. Look below: (All I did to get it all to display for this picture is take the text down to 11 rather than having it at 13, however its far to small.)
It doesn't just change the login screen, it happens all through the software. It's super hard for them to do their job when this is happening. Any ideas?
↧
Wavelink in MC9090 and MC9060?
Hi,
I bought two MC9000, one MC9090 and one MC9060. And I need check or installa on PDAs:
Wavelink Emulator Telnet installed. With WEB adapter. with Windows CE 5.0 running WaveLink Telnet CE Version 7.0.x
So, please can you help me?
Thanks
Luis
↧
Wavelink Starting Automatically
Hello
We have a Motorola Symbol MC9090 and from some days ago the WaveLink software started to start automatically and I don't know how to return to the Windows Mobile main screen to access the other programs. I tried to restart the machine but it didn't work. Now the only screen it shows is one written: No Host Connection <Enter> to Connect
Follow a screen shot attached to this discussion.
Anyone knows how can I get out of this screen?
↧
↧
RS507 bluetooth scanner locking up
I am using a Zebra WT41N0 and a RS507 bluetooth scanner, I am also using a TE applications and an AS400 has the host. The issue that I am having is that the user will be working and moving along just fine, they scan a barcode and then nothing happens, the scanner will not product a beam. When I remove and reinsert the battery I get the start up LED's and then it goes back to doing nothing. The only way to fix it is to have the user log out and then reboot the terminal and pair it again. Also the user will be working and the pairing barcode will pop up for unknown reason and asked to be paired again. I tested it with a fully charged battery and it happened to be. I put the scanner in pick list mode and enabled the low battery warnings but I did not get any warnings about battery getting low. Are there any ideas of what could be happening? Thanks
↧
I am unable to get the Caps Lock to work in Wavelink for Android using MC9200
I have a brand new MC92N0-GA0SYEAA6WR with Android. I am using Wavelink Terminal Emulation Version 2.0.16.4933
This is one of the first Android versions of the MC9200 that we have purchased. We hope to switch to these and move away from the Windows CE devices we have used exclusively. I am working to get the Android device operational in our environment and we require that the caps lock be engaged at all times when in Wavelink. I went to configure the emulation parameters and made sure Initial Caps Lock State was checked. I restarted Wavelink to have that change take effect, but when our login screen comes up, it is still all in lower case. I went back into the emulation parameters and saw that the change I made was still there. I decided to also check Initial Caps Lock State under VT Emulation. This still resulted in all lower case. I checked out one of our Windows handhelds and confirmed where I thought the Caps Lock was toggled in the Configuration Tool on my laptop. However, I was unable to find a location in the Wavelink software on the handheld where Caps Lock was toggled. Our Windows devices do work though. Caps is always engaged. I am not sure what I am missing with the Android device. Is this something that simply cannot be changed in the Wavelink client? Any help would be appreciated. I found out we have 55 of these Android handhelds on order so I need to find a solution.
Thanks!
↧
install Wavelink on MC9090
Hi All,
Brand new to this. I have my MC9090 hooked up to my Server via USB in the cradle. I installed Wavelink StudioCOM and when I hit click on Load Client it asks for a Wavelink Client File. Don't know what that is but am I doing this right and if so where do I get this file?
Paul
↧
How to send data from a thrid android app to Velocity
My goal is to send data to Velocity client. For this reason I am using an intent on my custom Application. the code is the following:
public void SendToVelocity(View view)
{ Intent sendIntent = new Intent(); sendIntent.setAction("com.wavelink.intent.action.EMDK.SEND"); sendIntent.addCategory("android.intent.category.DEFAULT"); sendIntent.putExtra(Intent.EXTRA_TEXT, "RFID data"); sendIntent.setType("text/plain"); if (sendIntent.resolveActivity(getPackageManager()) != null) { startActivity(sendIntent); }
}
However the above code does not get inside if statement. This means that it can not resolve current intent action.
My questions are:
- Is the above (com.wavelink.intent.action.EMDK.SEND) action string valid for calling corresponding Velocity Action? If not what is the corrcet string?
- The above method would like to be called on a key press. What script to I need to write in Velocity console in order to call a method of another application?
↧
↧
TLS 1.2 support in Velocity?
Questions:
Does Velocity support TLS 1.2 protocol? I am pretty sure this is yes.
Does it support importing TLS certificates?
↧
What program can be used to load the browser from Windows 10
What program can be used to load the WaveLink Telnet CE Web browser from a Windows 10 PC? I have been using Windows Mobile Device Center from Windows 7 pc's but it is not supported on Windows 10.
↧
TelNetCE CE 7.3: Next input field
Hi,
We are using SAP ITS with Wavelink Industrial browser 7.3. We have programmed to go to next input field when "Enter" key is pressed. The functionality is working in the internet explorer but on the WaveLink industrial browser. The function keys are also not working with the industrial browser.
Please let me know if I'm missing any step in this.
Thanks
Lin
↧
Where can I download Naurtech CETerm 5.7
The CETerm link on the downloads page does not work.
Where can I download Naurtech CETerm 5.7?
FYI here is the link that is inactive.
↧
↧
MC9190 and MC92N0 with 2 host profiles and 2 sessions.
customer is using MC9190 and MC92N0 with 2 host profiles and 2 sessions.
MC9190
Windows mobile 6.5
Telnet version 7.0.122
MC92N0-G30SXERA6WR
Windows mobile 6.5
Telnet version 7.3.196
The telnet settings and both the units are configured the same.
One host profile connects to AS400 and the other host profile connects to IBM
With MC9190 customer is able to connect to both the sessions. They are able to switch between 2 sessions.
However, with MC92N0 if customer tries logging in to both the sessions, it logs out the other session. At one time customer is able to log to one session only.
Is there a known issue? Are there any settings that we need to change on MC92NO?
↧
Wavelink Monitor.exe error
How do I prevent or fix wavelink Monitor.exe error. It prevents my device from warn reboot.
Where can I find all the logs for package deployed on MC75?
↧
Wavelink Starting Automatically
Hello
We have a Motorola Symbol MC9090 and from some days ago the WaveLink software started to start automatically and I don't know how to return to the Windows Mobile main screen to access the other programs. I tried to restart the machine but it didn't work. Now the only screen it shows is one written: No Host Connection <Enter> to Connect
Follow a screen shot attached to this discussion.
Anyone knows how can I get out of this screen?
↧