We are using Wavelink TE on Moto MC32n0(VT100).
Funciton F1-F5 are working well,but F6-F9 not working.
How to make it work.
↧
function key F6-F9 not work with SAP
↧
Default text size on Telnet CE
How can i set default text size to smaller on start?
↧
↧
Macro to set session switch buttons doesn't work
Hello,
I'm working with Motorola MC9190s. Sometimes when they come back from repair, the red/green buttons to switch sessions doesn't work. I've tried setting a key Macro like this:
007D:\8200 Green button to Previous Session
007E:\8300 Red button to Next Session
This doesn't work unfortunately. I've set the macros in both places. After downloading to the 9190, I see the macros in termcfg.bin and hostcfg.bin in thier respective locations . These were setup prior to me and looking at the other units, they have no macros set. Could someone shed some light on what other ways these keys could have been set?
↧
Velocity Android Keyboard
is it possible to have a keyboard only on the Right\left side of the display in a landscape Mode?
I was able to generate a keyboard, by the console, but not able to find any information about the position (X,Y) of it on the display.
The keyboard is always showed on the bottom of the display and for all length of the display.
↧
F5 function key is not working in SAP ITS screens
Hi experts,
We are using SAP ITS RF and wavelink browser on intermec CK3x devices. We are having an issue with F5 function key. When F5 is hit, the screen just refreshes and it does not do the intended action. It looks like the key code "F5" is not being recognized by ITS template.
In the ITS template, we have maintained the following meta tag for "F5".
<META HTTP-Equiv="OnKeydispatch0x74" content="Javascript:setFKey('5');">
The keyboard test gives the following key codes for "F5".
F5 = 3F00 under the keyboard test
F5 = 0074 under the windows keyboard test
Am I missing something.?
Thanks in advance.
↧
↧
Text Goes Off Screen - Wavelink, Produce Pro
Hey everyone,
I've been having this issue with my MC9190s and MC92N0s for awhile now and I still haven't figured it out.
Basically we run using Produce Pro and the text seems to be running off the screen. I'm not allowed to take the simple route of just enabling the horizontal scroll.
Here's what going on:
As you can see, the text cuts off at 2. There is more after this. Look below: (All I did to get it all to display for this picture is take the text down to 11 rather than having it at 13, however its far to small.)
It doesn't just change the login screen, it happens all through the software. It's super hard for them to do their job when this is happening. Any ideas?
↧
Advance page in Zebra MC32 in Wavelink Terminal Emulation
Hello.
I need to configure some Zebra MC32 devices (Windows CE7) with a page advance key in Wavelink TE.
Can you tell me how I can configure it?
Thanks in advance.
Carlos
↧
Delayed key respose motorola VH10
Hello,
Has anybody encountered the problem where on initial load of Wavelink Industrial browser on Windows CE 6.00 running on Motorola VH10 device everything is fine but after a while of operating the key presses are very delayed ? It takes a few seconds for a key press to register?
Thanks,
↧
MC9190 and MC92N0 with 2 host profiles and 2 sessions.
customer is using MC9190 and MC92N0 with 2 host profiles and 2 sessions.
MC9190
Windows mobile 6.5
Telnet version 7.0.122
MC92N0-G30SXERA6WR
Windows mobile 6.5
Telnet version 7.3.196
The telnet settings and both the units are configured the same.
One host profile connects to AS400 and the other host profile connects to IBM
With MC9190 customer is able to connect to both the sessions. They are able to switch between 2 sessions.
However, with MC92N0 if customer tries logging in to both the sessions, it logs out the other session. At one time customer is able to log to one session only.
Is there a known issue? Are there any settings that we need to change on MC92NO?
↧
↧
F5 function key is not working in SAP ITS screens
Hi experts,
We are using SAP ITS RF and wavelink browser on intermec CK3x devices. We are having an issue with F5 function key. When F5 is hit, the screen just refreshes and it does not do the intended action. It looks like the key code "F5" is not being recognized by ITS template.
In the ITS template, we have maintained the following meta tag for "F5".
<META HTTP-Equiv="OnKeydispatch0x74" content="Javascript:setFKey('5');">
The keyboard test gives the following key codes for "F5".
F5 = 3F00 under the keyboard test
F5 = 0074 under the windows keyboard test
Am I missing something.?
Thanks in advance.
↧
MC9090/MC9100.MC9200 host profile
I am working with MC9090/MC9100/MC9200 when creating the host profiles is there any way to use the server name instead of the ip address.
↧
Wyse 60 emulation
What Host Type would be used if a customer is asking if Wyse 60 is supported?
Would they use XTERM?
↧
Where can I download Naurtech CETerm 5.7
The CETerm link on the downloads page does not work.
Where can I download Naurtech CETerm 5.7?
FYI here is the link that is inactive.
↧
↧
Wavelink Starting Automatically
Hello
We have a Motorola Symbol MC9090 and from some days ago the WaveLink software started to start automatically and I don't know how to return to the Windows Mobile main screen to access the other programs. I tried to restart the machine but it didn't work. Now the only screen it shows is one written: No Host Connection <Enter> to Connect
Follow a screen shot attached to this discussion.
Anyone knows how can I get out of this screen?
↧
Need help with a settings issue
I am trying to remotely do this using Avalanche without having to go to 150 scanners and do this individually :
1. Start > Settings > System > Intermec Settings > Device Settings > Power Management > Battery Power > Device turns off after > Disabled.
2. Start > Settings > System > Intermec Settings > Communications > 802.11 Radio > Funk Security > Profile 1 > Power Mode – Change this from PSP to CAM. CAM is Constant Awake Mode and is typically intended for devices where power isn’t an issue and usually provides better connectivity performance.
Anyone know if there is a setting that will allow me to deploy this with a few clicks?
↧
RFID Tag Read from SAP ITS mobile
we are trying to achieve RFID tag read functionality using SAP ITS Mobile, which is web URL format on MC9090-G Handheld Device.
went through the referance guide, scripting.. but could not find anything specefic to RFID integration.
scripting for web pages with referance to RFID tag read function.
any help owuld be highly appricated.
Thanks.
↧
barcode scanner on telnetCE, device intermec CN51
Hello
ii worked before on cn70 and telnetce, but now i received new intermec cn51.
Installed:
WLTE_UNI_WM65_LANG_7_3_225_AS.exe
on telnetCE, barcode scanner dont write data, outside TelnetCE screen, works fine
changed this parameters but no luck
Emulation Parameters:
1. Scanner then Common and "Disable Scanner" to YES
2. Scanner then Common and "Use Scanner As Keyboard Wedge" to ENABLE
could you help me?
thanks in advance
↧
↧
Remote Control Grayed out
I am running AMC 5.3.1 with RC 4.1.3. I have installed the remote control package to a lab test handheld. I see the package installed on the devicedetails, but the remote control button is grayed out. Any suggestions?
↧
WAVELINK TELNET CE 5250 SCREEN SIZE 27 x 132
Hello,
I need to set up a Motorola VC5090 with Wavelink telnet CE (5250 emulation ) with screen size 27x132.
What type of Font should I use ?
Thanks
Regards.
↧
Is it possible to send the Wavelink configuration using Soti Mobi control?
On Zebra XT15 with Windows mobile 6.5, can i send the wavelink configuration using Soti Mobi control?
↧