Hi All,
We are using Avalanche 5.3.1.50. We have 260 Mobile devices.
We are experiencing really poor UI performance in the Avalanche Console and Web app. It takes over a minute to populate the UI. Does anyone have any performance tips?
We are displaying the following columns:
Serial | Terminal ID | IP | Last Contact | Recent Activity | Notes | Sync State | Device Name
The performance has degraded as we have added more devices.
Hi!
We are using Motorolа Mc9190 terminals and Wavelink Telnet CE Version 7.3.172 with following settings:
Emulation: VT220
Display language: Russian - KOI8
Server Language: UTF-8
Displaying of russian symbols are fine but
If we enter russian characters by keyboard or by scanning barcodes we get symbols ?????
Is there any way to solve this issue?
Hello.
I have been tasked with migrating our old Symbol VRC6946 terminals to Motorola VC5090.
On the VRC6946, we previously used 'OUTCOM:\#1A:OUTCOM' in an output field to turn on a sick CLV450 scanner via the com port.
Try as I may, I can't get the VRC5090 to do the same.
Any help would be appreciated.
Regards,
Don
Hello,
on MC3190 when we use Telnet CE ( any version) the level of the sound is not enough loud to be hear by a end user in the warehouse
we need to know how we can set correctly TelnetCE to have a very heavy sound
thanks
Sebastien
Hi,
I didn't find any mobile device inventory information as title. Does wavelink avalanche can detect that?
What does the formula look like?
When device tries to connect to Agent the error unlicensed message pops up on the Enabler on device.
I have read the document about this subject (Version 2 - 5 Nov 2013)
I verified all the causes/solutions and we don't match wich none
The Avalanche SE version is 5.0.0.278
The Avalanche Enabler version is 4.09-03 (same version for the old or new devices)
Only the fact that only the "old" (bought August 2011) mobile devices get this error
the new one (bought Sept 2012) doesn't have this error
Do we have a "Best before date" to update the mobiles ?
thanks to every body for an idea to fix this problem
I am trying to remotely do this using Avalanche without having to go to 150 scanners and do this individually :
1. Start > Settings > System > Intermec Settings > Device Settings > Power Management > Battery Power > Device turns off after > Disabled.
2. Start > Settings > System > Intermec Settings > Communications > 802.11 Radio > Funk Security > Profile 1 > Power Mode – Change this from PSP to CAM. CAM is Constant Awake Mode and is typically intended for devices where power isn’t an issue and usually provides better connectivity performance.
Anyone know if there is a setting that will allow me to deploy this with a few clicks?
Hello. Some time ago I had problems with Datalogic Elf and Telnet Web emulation version 7.2
Some characters appears strange, for example:
- accented a ("à") appears as "A" with an upper wave (the hispanic wave upper N, "tilde")
- the copyright (R) appears correctly but with character "A" with an upper "^" before che copyright character
Upgraded to version 7.3.77 resolved the problem
Now with a Motorola MC9190 with Telnet WEB emulation version 7.3.177 (the last one) I have the same problem.
I've tried to set the right Localization on Wavelink (Italy in my case) but with no luck.
Any suggestion?
Thanks
Hello,
on Enablers v5.3.40 for Motorola Device when you want to configure the WEP key ( 128 or 40 bit) The Enablers crash
you will see in attach files the crash
I have test on WIndows Seven 64 bits and Windows XP. The issue is the same
regards,
Sébastien
Hello,
I have tried to set the country code with Enabler on Motorola WT41N0
but it doesn't work.
In the enabler I have added this registry key
HKEY_LOCAL_MACHINE\Software\Wavelink Unified Network Interface\DDI
"CountryCode"=FR ( and I have also tried FRA )
but the country code never change
The only thing that is works is the 802.11d and the wireless profile
regards
Sebastien
Hi,
I have avalanche server version 4.9.0.75.
During first contact with tha Avanache server, the PDA receive the file _LOCAL.PRF with the following contens:
================================
# Wavelink property file.
AgentAddress=10.203.2.10
e.guid=0131343030383030353031373339
e.device.key=GJIKJLIOIIIKHAIKJOGJIKJLIOIIIKHAIKJOHLIOJLIGEFHPIGJFIGJJIG
================================
How can I have AgentAddress=servername.domain.ext without manual intervention?
Thankyou
Paolo
Ran into an issue this past weekend when our velocity server crashed, all devices started using the direct connect to host as planned.
However, once to the host (SAP), users would input their login credential and get stuck when they press logon.
I was able to replicate this on my laptop using a Velocity client and received the script error below.
Anyone have any ideas?
Thanks,
Drew
Hello community members,
We have some site changes planned for the community and portal over the coming months. In order to keep you better informed I have started a blog here:
http://community.landesk.com/support/community/cso?view=blog
If you would like to be notified about new blog posts click the "Receive Email Notifications" when on the page.
Regards
Karen
I running into an issue with the RFID functionality on a Motorola MC9190Z (connected to SAP via a Telnet session). The scanner is set to use 'When Detected' as the RFID input method when the trigger is pulled. I wrote an application that has one input field on the main screen. When this field is filled (and enter is pressed), the data is validated and the field will open back up for more input. For the most part it works just fine.
The issue I am running into is that the 'When Detected' method does not always wait for an open input field to enter data. It appears that data is getting chopped off, some data is even being missed. Does anyone have any ideas on how to proceed or alternatives that worked for them? Any help would be appreciated, thanks!
Dear colleagues,
I have problem with new demo Motorola Device Mobile Terminal WT41N0 (Windows CE 7.0) with new vesion 7.3.153 of Wavelink Telnet emulation.I can not be able to scann when I am in Telnet emulation.The scanner is working in Windows normaly but when I am in Telnet it is just not working proparly.The scanner have scanner lane but it is not giving me any resault of scanning.please if somebody have some idea let me know.
Thank you very much.
Ran into an issue this past weekend when our velocity server crashed, all devices started using the direct connect to host as planned.
However, once to the host (SAP), users would input their login credential and get stuck when they press logon.
I was able to replicate this on my laptop using a Velocity client and received the script error below.
Anyone have any ideas?
Thanks,
Drew
I’m a programmer who is working on your Wavelink Telnet CE product and I would to ask you about a problem in scripting code.
My customer own some Motorola MC319Z handhelds and asked me to configure a connection to their As400 and read some RFID Tags and put the datas in a blank field of their program.
I did the connection without any problem, as a 3477-FC emulator and entered in the emulation parameters to enable RFID functions, in ENABLE RFID key with Yes, in ENABLE KEY with <0x79> the F10 key in hexadecimal, in INSERT MODE with Auto-Detect, and USE TRIGGER with Yes.
I tried using it and when I arrive at the right screen of the program I press F10 on the keyboard of the handheld (not the keyboard of the emulator) and RFID start to read when I push the handheld read button, passing to my screen the tags read. It works correctly!
I also tried to create a script that, when reached the right screen of the program, it press automatically F10 using the code KEYPRESS_KEY <0x79> my F10 key but, it don’t works, this don’t enable the RFID reader.
When I did it manually it works perfectly and I receive a message on the screen that told me the number of tags read and put the tags on the field I use, but if I try to use the script, when KEYPRESS-KEY work, it do only a beep but no one message about RFID enable and create problems about the use of the emulator keyboard.
My script is a simple:
Script( RFID_MAN )
Profile( As400 )
Activate( From_Menu )
Keypress_Key( 0x79 )
Return
But it don’t press the F10 like I could do on the handheld keyboard. There’s something wrong in my code?
I would to enable RFID reader by script code and after the tags read end disable it.
Thanks for all and I hope you can help me as soon as possible.
Cordially
Hello,
do you have a tutorial for print on a serial printer on a Motorola VC70N0 ( or other device) in 5250 emulation and using AS400 Passthrough?
thanks a lot
Hello community members,
We have some site changes planned for the community and portal over the coming months. In order to keep you better informed I have started a blog here:
http://community.landesk.com/support/community/cso?view=blog
If you would like to be notified about new blog posts click the "Receive Email Notifications" when on the page.
Regards
Karen