Ich versuche auf einem Zebra MC9200-Handheld mit dem Betriebssystem Windows Embedded Handheld 6.5 Classic
eine Naurtech-CETERM (5.7/5.9) zu installieren.
Nach der Installation kommt folgende Meldung:
Wenn ich die Naurtech-CETERM dann aufrufe, kommt folgende Meldung:
Ist die Naurtech_version nicht kompatibel mit dem Handheld-OS ? Hat jemand da ähnliche Erfahrungen gesammelt.
Über eine Antwort würde ich mich sehr freuen !
Ralf Koch
I register a incorrect model of handheld and generate the license for an this incorrect model
Hi there,
Is there a way to encrypt or obfuscate the different passwords in the Telnet Emulation configuration file?
As of today, anyone who steals a device can navigate on the hard drive using a computer and USB cable, collect the Telnet Emulation files and recover most of the information in there, including password to change and/or exit the application.
This leads to get information about the telnet server address(es), getting to use the device as a gateway for any device to connect when access to the Operating System is granted (after exiting the application with the clear-text password recovered from the file), and some more.
If this is not possible today, is there anything planned in the near future? Ideally the password is encrypted in the file and the tool (Configmgr.exe) should only be able to read and change it, but not display it, as the tool itself is free for downloading on the Wavelink website.
Thanks for the feedback and help.
Patrick
Hi, We are using MC9190 with WL telnet 7.3.146 and all function keys are working fine. Now we are migrating to MC32N0.
We exported the config file (.wltna) and imported it into the WL configurator 7.3.303 to keep the same configuration parameters.
But now, we figured out that the F1 key is not behaving as in the MC9190. The function expected is to go back to the previous screen/menu, but it is not happening with MC32N0. It looks like the F1 key is not working at all.
We tested the key at Program Diagnostics screen and the key code is the same on both PDAs (3B00). Even the regular key is displaying the right key code (letter a = 0061).
does anybody know what is causing it?
Regards.
Renato Foresti
Hello Community,
I've a bunch of MC3190-S (not guns). Please suggest me where to buy Wavelink TelnetCE for this terminal.
Directly from Motorola or from Wavelink?
I've found document on motorola website with part numbers of wavelink telnetce.
Document says that SWE-82990-01 is license 2-in-1 for all device types.
But this site http://www.barcodediscount.com/catalog/symbol/part-swe-82990-01.htm says the following:
TN Client (Active Sync) for MC55, MC65, MC70, MC75, ES400 and ET1, VT/HP Emulation.
I'm totally confused. Will this part number fit MC3910-S ?
Thanks a lot,
Alex.
Hello,
I'm having problems with a Motorla scanner and Wavelink.
Everything (i need) that is configured in Emulation Parameters works, but the only thing that does not work is a "return" on barcode scan (Scan Handler).
My Wavelink version is TelnetCE 7.2.00 and i have a licence for VTHP.
I have also tried to use A(0)[A\\0D] but that does not work either.
The manual found on this page does not help either:
https://community.landesk.com/support/docs/29959
Is this a Wavelink version problem? Or am i doing something else wrong?
Scan Terminator is also \0D:
I have re-installed the Wavelink software on the Scanner, but that didn't help either.
Does anyone have any idea that i'm doing wrong?
The scanner is a Motorola MC9090 with WIndows Mobile 5.1
Thanks in advance!
Greetings,
Zarko
Hi all
i need to use DATALOGIC FALCON X3 connected to an As400 via 5250 emulator .. i don't understand how to configure keyboard key (not virtual keyboard) so that i can emulate "ENTER" and "Exit fields" keys tipical for As400
Thanks in advance
My handhelp computer is moto9190-RFID and using wavelink TE(WEB)Browser,I have two question:
1.how to enable RFID function?
I enable the RFID in the Emulator parameters but no data can be readed into the browser,why?
2.Using the wavelink, to press the numeric keyboard of the 9190,but the alphabet value be display
eg: press key "1", "a" be input what seems the ALPHA function key work,why?
Anyone know how I can do this? When I Start TelnetCE a windows comes up
"Scanner Selection" Do you want to use the scanner "Bluetooth SSI Scanner Driver" instead of the Default scanner "External SSI"
I have to hit no to continue with the connection Profile.
Running TelnetCE version 7.3.158
Thanks,
When attempting to log on from one of our off-site locations with the CE TERM browser, the user gets popup message mentioning a certificate - I think for the web application server. They have to navigate thru 2 warning screens, and then comes to a screen asking them to select the certificate that they want to use. There is a list box displayed with no entries. Sometimes they can press ENTER and bypass this screen, but sometimes they have to disconnect their Naurtech session and re-connect it, and then it usually works.
Are there any settings which could bypass these certificate screens? Any ideas or suggestions would be appreciated
We are using Intermec CK71's, connecting to SAP with ITS Mobile.
Hi all,
where can i change the codepage to change correct display of ä,ö,ü.
Thanks
Max
how do i install a wavelink licence onto a scanner?
I running into an issue with the RFID functionality on a Motorola MC9190Z (connected to SAP via a Telnet session). The scanner is set to use 'When Detected' as the RFID input method when the trigger is pulled. I wrote an application that has one input field on the main screen. When this field is filled (and enter is pressed), the data is validated and the field will open back up for more input. For the most part it works just fine.
The issue I am running into is that the 'When Detected' method does not always wait for an open input field to enter data. It appears that data is getting chopped off, some data is even being missed. Does anyone have any ideas on how to proceed or alternatives that worked for them? Any help would be appreciated, thanks!
Hello,
Our warehouse logistics are handled through an internal ERP application ensuring a proper flow of the reception and distribution of auto parts.
For this purpose we use around 110 mobile terminals with barcode scanners (RF Guns) of which 50 are deployed in the central warehouse.
The models used are:
Motorola MC2100
Datalogic Falcon X3
Datalogic Skorpio
In the central warehouse we are currently using 50 Motorola MC2100 scanners with Windows CE 6.0 operating system. As an emulator we are using Wavelink Corporation’s Telnet version 7.3.63 for Motorola MC2100 terminals.
Lately, the following problem began to manifest itself:
On a daily basis every Motorola MC2100 device suffers one or more unexplainable telnet session blocks.
When this happens, the terminal cannot interact with the application any more, the keyboard stops working and after a few minutes the display shows the "disconnected session" message. The terminal’s log doesn’t record any loss of connection to the access point.
The Access Points are all newly acquired from Motorola in order to ensure maximum compatibility between them and the mobile terminals.
Our question is:
To what extent the Telnet emulator may influence these session blocks, taking into account the following:
1. Telnet version
2. Certain parameters of the telnet configuration
3. “Avalanche Enable” configuration – we are using the Avalanche platform version 5.3.0.572 to manage our terminals
4. Having a large number of sessions (high load) on an Access Point.
Can you please help us with any idea in tackling this problem? Is there a log monitoring tool that can help us to identify the cause of these problems?
The situation is very critical and this seriously influences the process of delivery and reception of goods.
Thank you,
Florian Baloi
Hello,
I need to set up a Motorola VC5090 with Wavelink telnet CE (5250 emulation ) with screen size 27x132.
What type of Font should I use ?
Thanks
Regards.
Hello
We have a Motorola Symbol MC9090 and from some days ago the WaveLink software started to start automatically and I don't know how to return to the Windows Mobile main screen to access the other programs. I tried to restart the machine but it didn't work. Now the only screen it shows is one written: No Host Connection <Enter> to Connect
Follow a screen shot attached to this discussion.
Anyone knows how can I get out of this screen?
How can i set default text size to smaller on start?
Hello
ii worked before on cn70 and telnetce, but now i received new intermec cn51.
Installed:
WLTE_UNI_WM65_LANG_7_3_225_AS.exe
on telnetCE, barcode scanner dont write data, outside TelnetCE screen, works fine
changed this parameters but no luck
Emulation Parameters:
1. Scanner then Common and "Disable Scanner" to YES
2. Scanner then Common and "Use Scanner As Keyboard Wedge" to ENABLE
could you help me?
thanks in advance
Hi ,
do you know what vesion of Wavelink Telnet is OK for Intermec CN51 devices ? ( WM6.5).
thank you !
regards
I running into an issue with the RFID functionality on a Motorola MC9190Z (connected to SAP via a Telnet session). The scanner is set to use 'When Detected' as the RFID input method when the trigger is pulled. I wrote an application that has one input field on the main screen. When this field is filled (and enter is pressed), the data is validated and the field will open back up for more input. For the most part it works just fine.
The issue I am running into is that the 'When Detected' method does not always wait for an open input field to enter data. It appears that data is getting chopped off, some data is even being missed. Does anyone have any ideas on how to proceed or alternatives that worked for them? Any help would be appreciated, thanks!