Hi All
While processing the SAP transactions in wavelink browser (MC92N0), the screen elements (push buttons) are misplacing when moving from one transaction/screen to another transaction/screen.
How to prevent this, please advice we are in a final crunch.
Appreciate your quick response.
Incorrect Screen with misplaced buttons
Correct Screen:
Has anyone been able to after reloading an MC9XXX scanner to use the device name and name the terminal ID in avalanche? Is that possible?
Thanks,
I have a brand new MC92N0-GA0SYEAA6WR with Android. I am using Wavelink Terminal Emulation Version 2.0.16.4933
This is one of the first Android versions of the MC9200 that we have purchased. We hope to switch to these and move away from the Windows CE devices we have used exclusively. I am working to get the Android device operational in our environment and we require that the caps lock be engaged at all times when in Wavelink. I went to configure the emulation parameters and made sure Initial Caps Lock State was checked. I restarted Wavelink to have that change take effect, but when our login screen comes up, it is still all in lower case. I went back into the emulation parameters and saw that the change I made was still there. I decided to also check Initial Caps Lock State under VT Emulation. This still resulted in all lower case. I checked out one of our Windows handhelds and confirmed where I thought the Caps Lock was toggled in the Configuration Tool on my laptop. However, I was unable to find a location in the Wavelink software on the handheld where Caps Lock was toggled. Our Windows devices do work though. Caps is always engaged. I am not sure what I am missing with the Android device. Is this something that simply cannot be changed in the Wavelink client? Any help would be appreciated. I found out we have 55 of these Android handhelds on order so I need to find a solution.
Thanks!
Hi,
Does anyone have any experience with Avalanche 5.3 installing on an MC9190 running windows ce using windows 10 Fall Creator update?
We can't seem to figure this out and Zebra doesn't seem to know what has broke after the fall creator update.
A VC6090 running windows mobile works fine. I did get this working once. But after a reboot the MC9190 doesn't even show up in device manager when I place it in the cradle.
Any thoughts would be great.
Thanks.
Hi,
We are using SAP (SAPConsole) with TelnetCE on MC9190WM65 and older MC9090CE5. We will be using SAP's ABAP NOTIFY_HEXOUTPOUT (SAP Note 1451035) to send bell signal when a successful entry is made (and 3 bells for an invalid entry).
For this we would like to programmatically, using Escape Sequence, to enable/disable the Scan Decode Beep ?
What Escape Sequence can we use for this ?
Where can we get a reference guide on all the escape sequence we can use ?
Thanks all for your help.
Serge
Hey everyone,
I've been having this issue with my MC9190s and MC92N0s for awhile now and I still haven't figured it out.
Basically we run using Produce Pro and the text seems to be running off the screen. I'm not allowed to take the simple route of just enabling the horizontal scroll.
Here's what going on:
As you can see, the text cuts off at 2. There is more after this. Look below: (All I did to get it all to display for this picture is take the text down to 11 rather than having it at 13, however its far to small.)
It doesn't just change the login screen, it happens all through the software. It's super hard for them to do their job when this is happening. Any ideas?
The CETerm link on the downloads page does not work.
Where can I download Naurtech CETerm 5.7?
FYI here is the link that is inactive.
Hello,
We are using the Wavelink TE industrial browser.
I'd like to know how to handle the browser error 400.
This happens when a user's logon has timed out in SAP.
I would like to have the scanner go back to the site that is configured in the host profile.
Right now it stays on the error screen.
We have the browser menu hidden, so the only way for the user to get back to the URL in the host profile is to re-boot the device.
There is an option in the emualtion coniguration to re-direct the user to a URL if there is a 404 error.
Is it possible to do something like this when tere is a 400 error?
Thanks
Doug
I am using a Zebra WT41N0 and a RS507 bluetooth scanner, I am also using a TE applications and an AS400 has the host. The issue that I am having is that the user will be working and moving along just fine, they scan a barcode and then nothing happens, the scanner will not product a beam. When I remove and reinsert the battery I get the start up LED's and then it goes back to doing nothing. The only way to fix it is to have the user log out and then reboot the terminal and pair it again. Also the user will be working and the pairing barcode will pop up for unknown reason and asked to be paired again. I tested it with a fully charged battery and it happened to be. I put the scanner in pick list mode and enabled the low battery warnings but I did not get any warnings about battery getting low. Are there any ideas of what could be happening? Thanks
Hello
We have a Motorola Symbol MC9090 and from some days ago the WaveLink software started to start automatically and I don't know how to return to the Windows Mobile main screen to access the other programs. I tried to restart the machine but it didn't work. Now the only screen it shows is one written: No Host Connection <Enter> to Connect
Follow a screen shot attached to this discussion.
Anyone knows how can I get out of this screen?
I have a brand new MC92N0-GA0SYEAA6WR with Android. I am using Wavelink Terminal Emulation Version 2.0.16.4933
This is one of the first Android versions of the MC9200 that we have purchased. We hope to switch to these and move away from the Windows CE devices we have used exclusively. I am working to get the Android device operational in our environment and we require that the caps lock be engaged at all times when in Wavelink. I went to configure the emulation parameters and made sure Initial Caps Lock State was checked. I restarted Wavelink to have that change take effect, but when our login screen comes up, it is still all in lower case. I went back into the emulation parameters and saw that the change I made was still there. I decided to also check Initial Caps Lock State under VT Emulation. This still resulted in all lower case. I checked out one of our Windows handhelds and confirmed where I thought the Caps Lock was toggled in the Configuration Tool on my laptop. However, I was unable to find a location in the Wavelink software on the handheld where Caps Lock was toggled. Our Windows devices do work though. Caps is always engaged. I am not sure what I am missing with the Android device. Is this something that simply cannot be changed in the Wavelink client? Any help would be appreciated. I found out we have 55 of these Android handhelds on order so I need to find a solution.
Thanks!
On Zebra XT15 with Windows mobile 6.5, can i send the wavelink configuration using Soti Mobi control?
Questions:
Does Velocity support TLS 1.2 protocol? I am pretty sure this is yes.
Does it support importing TLS certificates?
Hello
ii worked before on cn70 and telnetce, but now i received new intermec cn51.
Installed:
WLTE_UNI_WM65_LANG_7_3_225_AS.exe
on telnetCE, barcode scanner dont write data, outside TelnetCE screen, works fine
changed this parameters but no luck
Emulation Parameters:
1. Scanner then Common and "Disable Scanner" to YES
2. Scanner then Common and "Use Scanner As Keyboard Wedge" to ENABLE
could you help me?
thanks in advance
Hello community,
it is possible the device name display in Wavelink?
As our warehousemen are always asked about the device name and they are not allowed from the application, it is difficult to determine the.
Is there a solution for this?
Hi,
I bought two MC9000, one MC9090 and one MC9060. And I need check or installa on PDAs:
Wavelink Emulator Telnet installed. With WEB adapter. with Windows CE 5.0 running WaveLink Telnet CE Version 7.0.x
So, please can you help me?
Thanks
Luis
Direct link for TelnetCE app for Motorola MC9090 ?
is it possible to have a keyboard only on the Right\left side of the display in a landscape Mode?
I was able to generate a keyboard, by the console, but not able to find any information about the position (X,Y) of it on the display.
The keyboard is always showed on the bottom of the display and for all length of the display.
How can i set default text size to smaller on start?
Good morning,
We have been facing an ongoing issue with our scanners randomly disconnecting users from their sessions with the message "AS400 session has been terminated". It happens at completely random times and has no pattern, rhyme or reason about it.
The wireless has been tested extensively and was actually updated this past year. I have personally stood in the areas and walked through the areas of the facility for hours while our network admin monitored my connection. I never dropped wireless once, and the connection to AS400 never went down, either. I have also verified that the scanner will have wireless connection when the session terminates. So the APs are ruled out.
I have read multiple accounts of setting keep alive parameters and rekey issues with SSH, but this is apart from that because it can work for hours without ever terminating the session. At other times I have seen a session terminate six times in thirty minutes.
I have attempted contacting the manufacturer of our scanners, but we only have hardware warranty.
I appreciate any and all help I can get, I'm by no means an AS400/5250 Emulator professional.
I'm just a lowly helpdesk technician and my manager kind of dumped this into my lap after attempting to fix it for two-three months.
If I can provide any further information, let me know. I will actively watch this forum and respond as fast as I can.
Best regards,
Chris Miller