is it possible to have a keyboard only on the Right\left side of the display in a landscape Mode?
I was able to generate a keyboard, by the console, but not able to find any information about the position (X,Y) of it on the display.
The keyboard is always showed on the bottom of the display and for all length of the display.
My goal is to send data to Velocity client. For this reason I am using an intent on my custom Application. the code is the following:
public void SendToVelocity(View view)
{ Intent sendIntent = new Intent(); sendIntent.setAction("com.wavelink.intent.action.EMDK.SEND"); sendIntent.addCategory("android.intent.category.DEFAULT"); sendIntent.putExtra(Intent.EXTRA_TEXT, "RFID data"); sendIntent.setType("text/plain"); if (sendIntent.resolveActivity(getPackageManager()) != null) { startActivity(sendIntent); }
}
However the above code does not get inside if statement. This means that it can not resolve current intent action.
My questions are:
We are looking at implementing MDM but our network admins are wanting to put some stipulations on items.
One being can we limit the number of devices that a single user can enroll once they have the tiny URL?
also wondering how other companies are using wavelink and certificates? We want to try and tie in some kind of two factor certificate or wireless settings i am curious how others are handling the devices connecting to their internal networks
How can i set default text size to smaller on start?
The CETerm link on the downloads page does not work.
Where can I download Naurtech CETerm 5.7?
FYI here is the link that is inactive.
Hi All,
I was just looking for a way to display the SSID (Reported and Assigned SSID) in the console. There are properties like AgentAddress, AppliedProfile, AssignedIP, etc., so is there a similar Property for SSID or is there a way we could get it displayed on the AMC Console under Columns or in Filters?
Hello,
Has anybody encountered the problem where on initial load of Wavelink Industrial browser on Windows CE 6.00 running on Motorola VH10 device everything is fine but after a while of operating the key presses are very delayed ? It takes a few seconds for a key press to register?
Thanks,
I want to run a .reg file automatically via Avalanche script, can someone post the syntax for this please
My goal is to send data to Velocity client. For this reason I am using an intent on my custom Application. the code is the following:
public void SendToVelocity(View view)
{ Intent sendIntent = new Intent(); sendIntent.setAction("com.wavelink.intent.action.EMDK.SEND"); sendIntent.addCategory("android.intent.category.DEFAULT"); sendIntent.putExtra(Intent.EXTRA_TEXT, "RFID data"); sendIntent.setType("text/plain"); if (sendIntent.resolveActivity(getPackageManager()) != null) { startActivity(sendIntent); }
}
However the above code does not get inside if statement. This means that it can not resolve current intent action.
My questions are:
I am using a Zebra WT41N0 and a RS507 bluetooth scanner, I am also using a TE applications and an AS400 has the host. The issue that I am having is that the user will be working and moving along just fine, they scan a barcode and then nothing happens, the scanner will not product a beam. When I remove and reinsert the battery I get the start up LED's and then it goes back to doing nothing. The only way to fix it is to have the user log out and then reboot the terminal and pair it again. Also the user will be working and the pairing barcode will pop up for unknown reason and asked to be paired again. I tested it with a fully charged battery and it happened to be. I put the scanner in pick list mode and enabled the low battery warnings but I did not get any warnings about battery getting low. Are there any ideas of what could be happening? Thanks
Hey everyone,
I've been having this issue with my MC9190s and MC92N0s for awhile now and I still haven't figured it out.
Basically we run using Produce Pro and the text seems to be running off the screen. I'm not allowed to take the simple route of just enabling the horizontal scroll.
Here's what going on:
As you can see, the text cuts off at 2. There is more after this. Look below: (All I did to get it all to display for this picture is take the text down to 11 rather than having it at 13, however its far to small.)
It doesn't just change the login screen, it happens all through the software. It's super hard for them to do their job when this is happening. Any ideas?
Hello.
I need to configure some Zebra MC32 devices (Windows CE7) with a page advance key in Wavelink TE.
Can you tell me how I can configure it?
Thanks in advance.
Carlos
Hello
ii worked before on cn70 and telnetce, but now i received new intermec cn51.
Installed:
WLTE_UNI_WM65_LANG_7_3_225_AS.exe
on telnetCE, barcode scanner dont write data, outside TelnetCE screen, works fine
changed this parameters but no luck
Emulation Parameters:
1. Scanner then Common and "Disable Scanner" to YES
2. Scanner then Common and "Use Scanner As Keyboard Wedge" to ENABLE
could you help me?
thanks in advance
Direct link for TelnetCE app for Motorola MC9090 ?
Hello,
We are using the Wavelink TE industrial browser.
I'd like to know how to handle the browser error 400.
This happens when a user's logon has timed out in SAP.
I would like to have the scanner go back to the site that is configured in the host profile.
Right now it stays on the error screen.
We have the browser menu hidden, so the only way for the user to get back to the URL in the host profile is to re-boot the device.
There is an option in the emualtion coniguration to re-direct the user to a URL if there is a 404 error.
Is it possible to do something like this when tere is a 400 error?
Thanks
Doug
Hi experts,
We are using SAP ITS RF and wavelink browser on intermec CK3x devices. We are having an issue with F5 function key. When F5 is hit, the screen just refreshes and it does not do the intended action. It looks like the key code "F5" is not being recognized by ITS template.
In the ITS template, we have maintained the following meta tag for "F5".
<META HTTP-Equiv="OnKeydispatch0x74" content="Javascript:setFKey('5');">
The keyboard test gives the following key codes for "F5".
F5 = 3F00 under the keyboard test
F5 = 0074 under the windows keyboard test
Am I missing something.?
Thanks in advance.
I want to run a .reg file automatically via Avalanche script, can someone post the syntax for this please
I have a brand new MC92N0-GA0SYEAA6WR with Android. I am using Wavelink Terminal Emulation Version 2.0.16.4933
This is one of the first Android versions of the MC9200 that we have purchased. We hope to switch to these and move away from the Windows CE devices we have used exclusively. I am working to get the Android device operational in our environment and we require that the caps lock be engaged at all times when in Wavelink. I went to configure the emulation parameters and made sure Initial Caps Lock State was checked. I restarted Wavelink to have that change take effect, but when our login screen comes up, it is still all in lower case. I went back into the emulation parameters and saw that the change I made was still there. I decided to also check Initial Caps Lock State under VT Emulation. This still resulted in all lower case. I checked out one of our Windows handhelds and confirmed where I thought the Caps Lock was toggled in the Configuration Tool on my laptop. However, I was unable to find a location in the Wavelink software on the handheld where Caps Lock was toggled. Our Windows devices do work though. Caps is always engaged. I am not sure what I am missing with the Android device. Is this something that simply cannot be changed in the Wavelink client? Any help would be appreciated. I found out we have 55 of these Android handhelds on order so I need to find a solution.
Thanks!
Hi,
Had been using Honeywell D6500 (WinCE5.0) with Wavelink for the model.
On the Wavelink, it shows the special keys ( Ctrl/Alt/Numeric) on the Wavelink Telnet Emulator.
But when upgrade device to Honeywell D6510 ( WinCE6.0), there is no Wavelink TE for it and had to use Universal version.
The universal version does not support special key indicator and therefore not able to show if CTRL/ALT/Numeric is keyed.
Is there no way to show them? Or will there be a version that will support D6510?
We have MOT_MC92N0_CE7 Wavelink Product Configuration installed on a PC. It is not communicating via USB. Is there a Windows 10 version? Is the product even still supported?