Hi,
Does anyone have any experience with Avalanche 5.3 installing on an MC9190 running windows ce using windows 10 Fall Creator update?
We can't seem to figure this out and Zebra doesn't seem to know what has broke after the fall creator update.
A VC6090 running windows mobile works fine. I did get this working once. But after a reboot the MC9190 doesn't even show up in device manager when I place it in the cradle.
Any thoughts would be great.
Thanks.
Questions:
Does Velocity support TLS 1.2 protocol? I am pretty sure this is yes.
Does it support importing TLS certificates?
Hello
I should run on the MC92xx a macro that uses the ENTER key as a combination of FIELD EXIT + ENTER for Telnet AS400 IBM but I do not know how to do it. Could you help me?
Thanks in advance.
Rixo67
The CETerm link on the downloads page does not work.
Where can I download Naurtech CETerm 5.7?
FYI here is the link that is inactive.
is it possible to have a keyboard only on the Right\left side of the display in a landscape Mode?
I was able to generate a keyboard, by the console, but not able to find any information about the position (X,Y) of it on the display.
The keyboard is always showed on the bottom of the display and for all length of the display.
Hello
ii worked before on cn70 and telnetce, but now i received new intermec cn51.
Installed:
WLTE_UNI_WM65_LANG_7_3_225_AS.exe
on telnetCE, barcode scanner dont write data, outside TelnetCE screen, works fine
changed this parameters but no luck
Emulation Parameters:
1. Scanner then Common and "Disable Scanner" to YES
2. Scanner then Common and "Use Scanner As Keyboard Wedge" to ENABLE
could you help me?
thanks in advance
Hi All,
Hope you are well. It is my first post/question in this forum and I am not sure if you will be able to help me with this one but it is worth a try. Currently on five Motorola WT4090 devices we are getting an extra message which is not sent from the software that we use for day to day tasks (JDA 2013). No other Motorola devices show this information. I have checked wave link telnet for host client settings and was able to change message by changing details on printer tab in session settings but I do not have a clue how to suppress/ get rid of it. I have attached some pictures, hope they will be helpful.
Many Thanks
On Zebra XT15 with Windows mobile 6.5, can i send the wavelink configuration using Soti Mobi control?
Hi experts,
We are using SAP ITS RF and wavelink browser on intermec CK3x devices. We are having an issue with F5 function key. When F5 is hit, the screen just refreshes and it does not do the intended action. It looks like the key code "F5" is not being recognized by ITS template.
In the ITS template, we have maintained the following meta tag for "F5".
<META HTTP-Equiv="OnKeydispatch0x74" content="Javascript:setFKey('5');">
The keyboard test gives the following key codes for "F5".
F5 = 3F00 under the keyboard test
F5 = 0074 under the windows keyboard test
Am I missing something.?
Thanks in advance.
We are using the Zebra WT41N0 wearable terminals with Voice and RS507 Bluetooth scanners.
These devices use TelnetCE to connect to an AS400 application using VT220 emulation
We have a problem when users decide to scan a barcode in a numeric STT field. The terminal
completely locks up and a reboot is needed. Afterwards, the Bluetooth scanner will no longer pair
properly. The pairing barcode displays 0x717CFFFFFFFF.
In order to get the Bluetooth working again I have to re-install the patch for making Bluetooth work
within Telnet. SPR27665_WT41N0_EN_035402_v1_0_WB.cab. Sometimes even this does not
help.
The download web page shows two separate installation files, for ARM-processor devices, and for x86 processor devices.
how can I tell what apk installation file to use in any given device?
would you please provide a list of the most common manufacturers' devices, and what installation file to use in each?
Dear all,
I would like to know if anyone has made a new install of Avalanche 6.2?
I've attempted this on my PC (Windows 8.1 SQL Server 2012 existing SQL instance) and also Win server 2012 and SQL server - a new machine with nothing installed on it - just Windows server - on which I installed SQL server 2012 and created new instance.
On both machines, the installation is done, during it, Ava install asks for DB connection credential and server which are on the same machine, creates Avalanche Databases.
When installation finished, it's not possible to launch http console; Enterprise server service is stopped, and eache time we try to start is, it fall dows after few seconds with the following error in the logs (colored red):
2017-12-13 16:46:43,366 INFO LoggingProperties - Avalanche Server version 6.2.0 - (c) 2013-2017 Ivanti
2017-12-13 16:46:43,368 INFO LoggingProperties - log4jAvalancheServer.properties: located in C:\Program Files\Wavelink\Avalanche\conf\main\log4jAvalancheServer.properties
2017-12-13 16:46:43,369 INFO LoggingProperties - Logging level set to: DEBUG
2017-12-13 16:46:43,372 INFO ServerConfigProperties - ServerConfigProperties initializing
2017-12-13 16:46:43,432 INFO ServerConfigProperties - server-config.xml: located in file:/C:/Program%20Files/Wavelink/Avalanche/conf/main/server-config.xml
2017-12-13 16:46:43,440 INFO SpringContextInitializer - SpringContextInitializer initializing
2017-12-13 16:46:45,733 INFO SpringContextInitializer - api-factory.xml: located in C:\Program Files\Wavelink\Avalanche/conf/main/api-factory.xml; initialized Wed Dec 13 16:46:43 CET 2017
2017-12-13 16:46:45,734 INFO InstallationUUID - InstallationUUID initializing
2017-12-13 16:46:45,734 INFO InstallationUUID - installationUUID: [de4fd05c-809e-4069-9005-443215c951b7]
2017-12-13 16:46:45,735 DEBUG AvalancheServer - Installation UUID initialized
2017-12-13 16:46:45,735 INFO AvalancheServer - Starting Avalanche Server...
2017-12-13 16:46:45,735 INFO AvalancheServer - Local drives are:
2017-12-13 16:46:45,735 INFO AvalancheServer - C:\ D:\ E:\ F:\
2017-12-13 16:46:45,737 INFO DatabaseProperties - DatabaseProperties initializing
2017-12-13 16:46:45,737 INFO DatabaseProperties - Hibernate Dialect set to: com.wavelink.avalanche.db.dialect.WavelinkeSQLServerDialect
2017-12-13 16:46:45,737 INFO DatabaseProperties - Database in use: Avalanche
2017-12-13 16:46:45,738 INFO DatabaseProperties - Data Source URL set to: jdbc:sqlserver://NEWSRV2017:1433;databaseName=Avalanche
2017-12-13 16:46:45,787 ERROR DatabaseProperties - HibernateSequenceCheck: No DB connection
2017-12-13 16:46:45,787 ERROR DatabaseProperties - setDatabaseProperties() failed.
2017-12-13 16:46:45,787 FATAL AvalancheServer - Unable to initialize DatabaseProperties.
2017-12-13 16:46:45,787 FATAL AvalancheServer - Initialization failed when attempting to set property: setDatabaseProperties()
2017-12-13 16:46:45,787 FATAL AvalancheServer - <<<< Avalanche Server will terminate... >>>>
2017-12-13 16:46:45,788 INFO AvalancheServer - <<<< Avalanche Server has terminated >>>>
Could somebody tell me what happens here and why is the wizard able to create database and establish db connection and not the enterprise server service?
Thx in advance for your help
Elie
Hello,
I want to create a script that will take a keyed in or scanned in data from a Telnet CE Session and modify an Avalanche Property Value for every device on my Avalanche SE. Is this possible?
I see a "Get_Avalanche_Property_Value" but nothing to Set a value.
we are trying to achieve RFID tag read functionality using SAP ITS Mobile, which is web URL format on MC9090-G Handheld Device.
went through the referance guide, scripting.. but could not find anything specefic to RFID integration.
scripting for web pages with referance to RFID tag read function.
any help owuld be highly appricated.
Thanks.
We are looking at implementing MDM but our network admins are wanting to put some stipulations on items.
One being can we limit the number of devices that a single user can enroll once they have the tiny URL?
also wondering how other companies are using wavelink and certificates? We want to try and tie in some kind of two factor certificate or wireless settings i am curious how others are handling the devices connecting to their internal networks
I have a brand new MC92N0-GA0SYEAA6WR with Android. I am using Wavelink Terminal Emulation Version 2.0.16.4933
This is one of the first Android versions of the MC9200 that we have purchased. We hope to switch to these and move away from the Windows CE devices we have used exclusively. I am working to get the Android device operational in our environment and we require that the caps lock be engaged at all times when in Wavelink. I went to configure the emulation parameters and made sure Initial Caps Lock State was checked. I restarted Wavelink to have that change take effect, but when our login screen comes up, it is still all in lower case. I went back into the emulation parameters and saw that the change I made was still there. I decided to also check Initial Caps Lock State under VT Emulation. This still resulted in all lower case. I checked out one of our Windows handhelds and confirmed where I thought the Caps Lock was toggled in the Configuration Tool on my laptop. However, I was unable to find a location in the Wavelink software on the handheld where Caps Lock was toggled. Our Windows devices do work though. Caps is always engaged. I am not sure what I am missing with the Android device. Is this something that simply cannot be changed in the Wavelink client? Any help would be appreciated. I found out we have 55 of these Android handhelds on order so I need to find a solution.
Thanks!
Hello
I should run on the MC92xx a macro that uses the ENTER key as a combination of FIELD EXIT + ENTER for Telnet AS400 IBM but I do not know how to do it. Could you help me?
Thanks in advance.
Rixo67
I am having some issues building a package for Windows CE 7 Operating System Deployment. I have the OS Update files from Zebra, but I am not able to create a package to deploy them to the devices that already have Avalanche installed. The only way I can do it right now is by installing manually? IS there a method of creating a package using the OS update files I already have. I was initialy trained on Avalanche over a year ago and we just started deployment this year so I am not up to speed on how to do package creation;
How can i set default text size to smaller on start?
Hello,
We are using the Wavelink TE industrial browser.
I'd like to know how to handle the browser error 400.
This happens when a user's logon has timed out in SAP.
I would like to have the scanner go back to the site that is configured in the host profile.
Right now it stays on the error screen.
We have the browser menu hidden, so the only way for the user to get back to the URL in the host profile is to re-boot the device.
There is an option in the emualtion coniguration to re-direct the user to a URL if there is a 404 error.
Is it possible to do something like this when tere is a 400 error?
Thanks
Doug